CBKBW - SF-S400 SOLVENT FREE COVE BASE ADHESIVE
- MSDS: CBKBW
- Manufacturer: NORTH AMERICAN ADHESIVE AND COATINGS CO
- Product Name: SF-S400 SOLVENT FREE COVE BASE ADHESIVE
- National Stock Number: 8040-00N069208
Product Identification
Product ID:SF-S400 SOLVENT FREE COVE BASE ADHESIVE
MSDS Date:01/01/1993
FSC:8040
NIIN:00N069208
MSDS Number: CBKBW
Responsible Party
WEST CHICAGO, IL 60185-1873
US
Emergency Phone: 708-801-4280
Info Phone: 708-801-4280
Cage: GO638
Contractor
Telephone: 708-231-7175
Cage: GO638
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGESTION:MAY CAUSE ABDOMINAL
PAIN, DISTRESS AND NAUSEA. DO NOT GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. INHALATION:HIGH VAPOR CONCENTRATION IN CONFINED
WORK AREAS MAY CAUSE IRRITATION T O NOSE & THROAT TO SENSITIVE
INDIVIDUALS. SKIN:MAY CAUSE IRRITATION TO SENSITIVE INDIVIDUALS.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:REPEATED, LONG-TERM EXPOSURE TO
SENSITIVE INDIVIDUALS MAY RESULT IN DERMATITIS. EYE:DIRECT CONTACT
MAY CAUSE BURNING, TEARING, REDNESS. CONCENTRATED VAPORS MAY CAUSE
IRRITATION TO SENSITIVE I NDIVIDUALS. CHRONIC:NONE LISTED BY
MANUFACTURER.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDER MAY BE MORE SUSCEPTIBLE TO EFFECTS OF THIS MATERIAL.
First Aid
First Aid:INGEST:TAKE 3-4 GLASSES OF WATER. INDUCE VOMIT. CALL PHYS
IMMED. INHAL:MOVE TO FRESH AIR. SKIN:WASH AFFECTED AREAS THORO WITH
WATER. IF IRRIT DEVELOPS, CALL PHYS. EYE:FLUSH W/LG AMT OF CLEAN
WATER FOR @ LEAST 15 MINS. CALL PHYS IMMED.
Fire Fighting
Flash Point:>212F,>100C
Extinguishing Media:FOR DRIED SOLIDS USE DRY CHEMICAL, WATER FOG, FOAM
OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:PRODUCT WILL NOT BURN UNTIL ALL WATER IS
EVAPORATED.
Accidental Release
Spill Release Procedures:COVER WITH ABSORBENT MATERIAL, TRANSFER TO
CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE IN WELL-VENTILATED AREA. SENSITIVE
INDIVIDUALS SHOULD AVOID PROLONGED SKIN CONTACT. AVOID EYE CONTACT.
CLOSE CONTAINER AFTER USE.
Other Precautions:KEEP FROM FREEZING. CLOSE CONTAINER WHEN NOT IN USE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VP:SAME AS WATER. VAP DENS:SAME AS WATER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:SUPDAT
Vapor Density:SUPDAT
Spec Gravity:1.35-1.45
Evaporation Rate & Reference:SAME AS WATER
Solubility in Water:100%
Appearance and Odor:WHITE PASTE, MILD ODOR.
Percent Volatiles by Volume:31-32
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
TRACES OF NITROGEN.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL COUNTY,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.